Hedge Strimmer

January 7th, 2009 by scooter Leave a reply »

Petrol Strimmer - Does anyone know the petrol/oil mix for the mccollough range (coloured yellow) thanxs?

It's simple really, My Dad has given me a petrol strimmer and petrol hedge strimmer which he hasn't actually used since buying new (I think he's lying there as they look well used, and I think he's plainly forgotten, Dad's eh!). Anyhow, he cannot find any of the literature to go with them and I have very little knowledge about them myself. I bought a starter pack from B&Q which has a petrol/oil mixer bottle. This has mixture gradients of 50/1 40/1 30/1 20/1 & 10/1. I have tried looking at similar models in the DIY shops but cannot find an exact match. So there it is then, if anyone has a Mccullough petrol strimmer or Hedge Strimmer and has any concept of what mixes they predominantly use then I would be forever in your debt well perhaps for a week or two let's not push it!! Looking forward to hearing from you. Churchie!

50 to 1 is the recommendation for my portable generator if that helps some

345MM PISTON RING FITS STRIMMER CHAINSAW HEDGE TRIMMER
345MM PISTON RING FITS STRIMMER CHAINSAW HEDGE TRIMMER
Paypal   US $7.87


Max and Hedge Strimmer


It's that time of year again, as autumn grows closer gardeners around the country are gearing up for that all essential end of year garden clean up. Hedge cutting can be hard work especially if the weather is nice, but it is extremely rewarding to see the results when you have finished.

Before you start

Before you start cutting in is imperative that you have the right hedge trimmer for the job. If you intend to do a lot of work or use the hedge trimmer on a regular basis, push the boat out and buy a quality make, Preferably a Petrol powered hedge trimmer. If you are only using your trimmer a few times a year I would recommend you go with the electric Trimmers, as they are cheaper and less expensive to fix if anything goes wrong.

Eye Protection can be useful because of the amount of sharp debris that can be thrown out of the machine.

Trimming Your Hedge

First start by trimming the sides of the hedge, the depth of the cut is dependent on your requirements and type of hedge. Once you have cut the sides it's time to trim the top, its always best if you can avoid leaning into the hedge it can damage the shape. If you are forced to lean into a difficult hedge then the T-board method is great. There are many aluminium towers or ladders available that will suit people's needs.

When you are cutting, seep the blades from right to left holding your left hand close to you, As you sweep the cuttings will fall straight of the hedge. A broom May also be useful to sweep the cuttings from the top of the hedge. When you think you have cut your hedge well on the sides and top, take a garden rake and gently tap and push the hedge. Some of the long branches can be bent into the hedge, when they spring out cut them off, this way you will avoid the hedge looking unsightly after a couple of days if the twigs were to have sprung out on their own.

Keep a pair of secateurs handy for trimming of any stubborn twigs of brambles. If you encounter a pernicious stem growing through your hedge it will be extremely difficult if not impossible to get to the root so trimming will be necessary.

Have plenty of heavy duty Bag's available for the foliage, I am always shocked how many Bags I fill just cutting hedges.

If You are in need of a new Long reach hedge trimmer please visit http://longreachhedgetrimmer.org.uk.

Advertisement

Leave a Reply

You must be logged in to post a comment.

Sitemap